News
04/09/2024
The manual laser welding system is being tested at NEFAZ

A manual laser welding system is being tested at NEFAZ, KAMAZ subsidiary in Bashkortostan.

With such welding, the time for seam is significantly reduced due to the high concentration of energy in the laser beam, in many cases preliminary cutting of the edges is not required, there is no need to wait for the seam to cool down between passes. The welding process with a laser device is non-contact.

Tests of the new equipment will last for a month. Now it is being tested in bus production for handrail welding. Then, with its help, it is planned to weld galvanized sheets to increase productivity when welding the frame of the driver's workplace and other components to replace less productive welding methods.

NAPI (National Industrial Information Agency)


Назад
Other news from section:
21.04.2025
KAMAZ has completed the assembly of the new K5 cabin frame
A new K5 cabin frame with a flat roof has been manufactured at the KAMAZ Scientific and Technical Center. This cabin will be used in the production of a line-up of vehicles for the Ministry of Emergency Situations and other special equipment. The first frame of the new cabin model has already been sent to the cabin frame factory, where the final work on the technical process will be carried out: applying sealant, installing doors and...
18.04.2025
Two coordinate measuring machines have been introduced at the TONAR plant
The Tonar plant continues its production modernization program. Two coordinate measuring machines (CMM) were introduced. The new equipment allows for high-precision measurements of geometric parameters of manufactured and purchased components and parts. This significantly improves the accuracy of product quality control and allows to detect even minor deviations from the set parameters. The first CMM is designed to measure the body parts of...