News
23/07/2026
Production of headlights for LADA Azimut started in Tolyatti
A complete set of optics for the future LADA Azimut model has begun to be produced at the site of the Lighting Solutions company in Tolyatti, the press service of AvtoVAZ reports.
According to forecasts, capacity of the new production facility will be up to 80 thousand sets of lighting equipment per year, which should completely cover the needs of the concern. The enterprise is planned to reach its design capacity by the end of 2026.
The site plans to produce front Full LED headlights of Xvision's proprietary architecture, daytime running lights, central and side taillights, fog lights, as well as the first dynamic turn indicators for LADA cars.
NAPI (National Industrial Information Agency)
Other news from section:
22.07.2026
A new automatic shaft straightening press has been put into operation in the thermogalvanic shop of the KAMAZ Engine Plant. The equipment was purchased as part of the Axle Manufacturing project.
On the new press, 16 types of shafts go through the straightening process (to eliminate the warping of shafts resulting from their cooling during quenching). More than 400 parts must be processed per shift.
The new automatic press replaced all...
16.07.2026
The KAMAZ Foundry Plant has developed a technology for manufacturing a solid-cast axle case.
The 3D model of an ordinary welded axle case, consisting of three parts, was taken as a basis and combined, and the wall thickness was almost halved - from 15 to 8 mm. Two holes for the ladders that hold the springs have been modified. Previously, they were cast and thin, welded to the axle, and sometimes deformed under load. Now these elements are...
News archive